Hunan plastic vapor-liquid filter parameters a, silk warp range: 0.10mm-0.55mm (commonly silk warp is: 0.20mm-0.25mm) In addition, a number of shares of woven wire twisted together. 2, hole size: from (2 × 3mm) to (4 × 5mm) and then to (12 × 6mm) also can be customized according to customer requirements for hole size for fine-tuning. Openings form macropores and cross holes are arranged (in the longitudinal direction of the hole is the same size, the width is not the same) 3, the plastic liquid filter surface conditions: flat type mesh and pressed into the corrugated bellows mesh (width and depth of the corrugations with different specifications) 4, width: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400,500 mm, 600mm, etc. 5, the main material: High density polypropylene pp, high density polyethylene, Teflon, Hunan plastic vapor-liquid filter main purposes: mainly used as demister / screen demister a corrosion-resistant material used to separate gas inside the droplets. Can be extruded, for the manufacture of filtration equipment. 1, Standard Specification SP 40-100 60-150 105-300 140-400 160-400 2,-efficient specifications DP 60-100 80-100 80-150 150-300 200-400 3, high penetration-type specification HR 20-100 80-10070-400 170-560170-600